Product Introduction
Our latest new product, Fieri high speed handpiece , this handpiece is in the previous ordinary handpiece on the basis of customer feedback developed
Product Parameter
Product Parameter |
Fieri high speed handpiece |
Rotation speed |
280.000-400.000RPM |
Air pressure |
0.25Mpa-0.30Mpa |
Torque |
Torque:21,Standard:19 |
Bur applicable) |
Φ1.593-Φ1.599mm |
Noise |
≤70db |
Normal handpiece N.W: |
29-40 |
Chucking power |
>30N |
Connection |
2 hole/4 hole |
Bearing |
Ceramic bearing |
Sterilization |
The dental drill can be sterilized under a high pressure 135℃ steam |
Product Packing
1.High speed handpiece- 1 piece
2.Spanner-1 piece
3.Needle-1 piece
Product feature and application
Motor advantage: different from others, the motor independent research and development patent, is our strength, machine operation, high stability, can withstand high temperature disinfection, durable
Design of anti-retraction: because the probability of secondary infection of many handpiece is too high, we have made the design of anti-retraction in this handpiece, which can keep the head and core from contamination by impurities, avoid blood flow in, cross infection and extend the service life of the handpiece
Good bearing: ceramic bearing, with eight beads inside, low rotation noise, not easy to deformation
Good shaft: not easy to fly needle
Cartridge:use close type cartridge,cartridge is surrounded by 360degrees of cylinder clamp ,longer service life
http://www.chinaywjmed.com/